How do you use a hand stick sewing machine?

1. Preparation: Take out the manual sewing machine and lift the pressure roller upwards. Lay the fabric on the work panel and secure it with clips. Insert the wire into the spool, thread the wire through the conduit, then through the wire eye, and pull out a section of wire. Thread the wire head between the wire head and the wire tail through the wire guide rail.

2. Start sewing: Press the pressure roller down, move the handle on the right side of the sewing machine, and push the needle forward until it is just at the edge of the fabric. When the needle reaches its highest point, press down the blade on the sewing machine to cut the thread between the thread head and the thread end.

3. Sewing: Press the needle down and push the sewing machine handle forward. The sewing machine automatically pushes the fabric forward. Transfer the needle into the fabric, then move the fabric forward, and the sewing machine will automatically sew. During the sewing process, maintain a uniform speed and directionality.

4. End treatment: At the end of sewing, lift the pressure roller at the position where the needle is about to penetrate the last point. Then move the handle at the top and pull out a piece of thread. Pull the thread out of the thread pressing wheel, then press the pressing wheel down and push the needle forward to nail the thread.

5. Fabric treatment: Cut off excess threads from the sewn fabric. Iron the fabric as needed.

6. Safety precautions: For manual sewing machines, it is necessary to maintain the stability of the machine and fabric to avoid accidents. During use, it is important to maintain composure and avoid fanaticism and refusal to use safety measures.